Cost to Replace an Oven Igniter
Replacing a gas oven igniter means removing the oven racks and bottom panel to reach the burner assembly, disconnecting the old igniter, and fitting a manufacturer-approved replacement. Homeowners commonly take it on when the igniter stays dark or heats too weakly to open the safety gas valve; reaching the bracket and reconnecting the wiring are the careful parts.
- Oven igniter1 each @ $35$35
- Supplies subtotal$28–$48
- Labor$75–$156
- Permits & fees$50
Based on 1 igniter (typical size). Figures are ballparks — get a contractor quote to confirm.
Common reasons homeowners do this job
- The oven igniter fails to glow.
- The igniter heats too weakly to open the safety gas valve.
- The existing igniter is worn or damaged.
- A faulty igniter needs replacement with a manufacturer-approved part matched to the oven model.
DIY or call a pro?
This is a DIY-friendly repair, but a professional is worth considering if removing the burner-mounted bracket or reconnecting the wire harness or ceramic wire caps feels uncertain. Disconnect the oven from power and allow it to cool completely before any work begins. Handle the replacement igniter carefully because its heating element is fragile.
Frequently asked questions
- Can I replace an oven igniter myself, or is hiring help a better choice?
- This is a legitimate DIY repair for someone comfortable removing the bottom oven panel, working at the burner bracket, and reconnecting the wiring. Consider professional help if any of those steps feel uncertain. Keep the oven disconnected from power until reassembly is complete, and begin only once it is fully cool.
- What can make oven igniter replacement cost more?
- The price can rise with the job size and the number of igniters, as well as labor time and the replacement material. A minimum or trip charge can also affect a small job.
- What should I check before ordering a replacement oven igniter?
- First verify that the igniter is faulty: it may stay dark or heat too weakly to open the safety gas valve. Then locate the oven model number and select a manufacturer-approved replacement igniter for that model.
- How should a new gas oven igniter be handled during installation?
- Treat the heating element as fragile. The installation uses a 1/4-inch nut driver for the igniter bracket screws, along with a Phillips head screwdriver and needle-nose pliers.
Have a different situation?
Every home is different. Describe yours to Gable Pro and get a diagnosis, a real cost estimate, and — if you want — a match to a vetted local pro.