Cost to Repipe a House
Repiping replaces a home’s existing plumbing lines with new PEX, copper, or CPVC pipe, along with brass connection fittings, crimp rings, and pipe anchors. The work requires planning new pipe routes and access points, removing old piping, and verifying every connection before restoring the water supply. Because mistakes can cause significant water damage and mold growth, this is a hard plumbing project.
Common reasons homeowners do this job
- The existing plumbing system has current issues that need to be identified and addressed.
- Old plumbing lines need to be replaced.
- Plumbing lines are worn or damaged.
- A homeowner is upgrading to PEX, copper, or CPVC piping.
- New pipe routing and access points are needed for the replacement work.
DIY or call a pro?
A licensed professional should handle a whole-house repipe because the plumbing system is complex and improper work can lead to significant water damage and mold growth. The work includes planning pipe routing, securing new pipe with anchors, and verifying crimped connections with a crimp-check gauge before checking joints for leaks. Check with your local building department whether this work needs a permit.
Frequently asked questions
- Can I repipe my house myself, or should I hire someone?
- A licensed professional should do this work. Repiping requires removing the existing piping, planning routes and access points, making verified connections, and inspecting all joints after water is restored; improper plumbing can cause substantial water damage and mold growth.
- What makes the price of a house repipe go up?
- The price depends on the job size, labor time, and the piping and fitting materials selected. Removing and hauling away old piping can also add to the job.
- What should be decided before new plumbing pipe is installed?
- Start by inspecting the existing plumbing system for current issues, then plan the route for new pipes and identify the access points needed. Material selection is also an early decision: the replacement pipe may be PEX, copper, or CPVC.
- Why is a crimp-check gauge used during a repipe?
- It is used after crimping to verify the connections. That check matters before restoring the main water supply and inspecting every joint for leaks, since an improper connection can contribute to water damage and mold growth.
Have a different situation?
Every home is different. Describe yours to Gable Pro and get a diagnosis, a real cost estimate, and — if you want — a match to a vetted local pro.